How To Install Hood Support Rod

The hood back up struts hold upwards the hood of your vehicle. This allows you to access the engine compartment without holding the hood up by hand or with a prop rod. Failed hood struts tin exist both dangerous and annoying as they could allow the hood to fall on your caput.

Part one of 2: Removing the old hood support struts

In order to safely and efficiently supersede your hood back up struts, yous will demand a couple of basic tools.

Materials Needed

Flathead screwdriver
New hood back up struts
Prop for the hood (a piece of wood or pipe)
Protective gloves
Ratchet and sockets
Repair manuals (optional); you can buy these online through Chilton, or Autozone provides them for gratuitous for certain makes and models
Safety glasses

car hood supported with a prop

Step one: Support the hood with a prop. Open up the hood and back up it with a prop such as a length of wood or pipe.

Alternatively, you can have a friend assist you lot and hold the hood open for yous.

retaining clips being removed

Step 2: Remove the hood support strut retaining clips. Remove the back up strut retaining clips using a flathead screwdriver.

person unbolting the fasteners

Footstep 3: Unbolt the fasteners. Unbolt the fasteners that connect the strut to the body.

Typically, this is done using a ratchet and socket of the appropriate size.

hand removing the strut

Step 4: Remove the strut. Pull the strut off the ball joint and remove the strut from the vehicle.

Part 2 of 2: Installing the new hood support strut

new strut loosely mounted in place

Footstep 1: Mountain the new strut. Put the new strut in identify and loosely install the mounting hardware, only do not tighten it downwards.

hand pushing the new strut onto the ball joint

Stride 2: Push the strut onto the ball joint. Identify the strut over the brawl joint and use your finger to employ pressure until it pops into place.

hand tightening down fasteners

Footstep 3: Tighten downward the fasteners. Tighten down the fasteners until they are snug.

Your hood strut replacement should now be complete. All the same, if you would prefer to have a professional do this job for yous, the certified mechanics at YourMechanic offer practiced hood strut replacement service.

The statements expressed above are only for advisory purposes and should be independently verified. Please see our terms of service for more details